LT Technologies, a leading manufacturer and designer of advanced water purification, filtration and chemical treatment systems, today announced that it has been awarded a contract to supply systems for rain water reclamation and reuse, as well as an ultrapure water production for Georgetown University’s new science center. The new Science Center, projected to be completed by 2011, will be a state-of-the art research and teaching center for biology, chemistry, and physics.

A key factor in the selection of LT Technologies was the company’s expertise in sustainable water systems. One of the goals set by planners of the new facility was for it to be designed as a “green” building with the goal of obtaining a Silver LEED rating from the U.S. Green Building Council. LEED promotes a whole-building approach to sustainability by recognizing performance in several key areas of human and environmental health, including water savings, energy efficiency, and indoor environmental quality.

The LT Technology systems that will be deployed at the new facility are intended to help it achieve the stringent Silver LEED Certification level. The company will provide an innovative rain water harvesting system that will be fully automated and will create clean water for non-potable uses throughout the entire complex.

“Our rain water harvesting system saves an enormous amount of water from running down the storm drain systems, and instead, efficiently reclaims it and makes it available for an array of uses,” said LT Technologies CEO Tom Belmont. “When we started developing our system, we were familiar with some of the older specifications out there. But we knew we could build a better, smaller and more affordable system. Now, with nearly two years of development work behind us, we can offer customers a very advanced yet cost-effective solution. We’re very excited about the future prospects of this technology.”

LT Technologies has also been awarded as part of the contract to manufacture a high-purity water system to be utilized in the building’s laboratory environments. Added Belmont: “LT Technologies is excited to be affiliated with such a prestigious and forward-thinking institution, and we’re proud to be providing, in some small way, the innovation and tools needed to advance Georgetown University’s excellence in research and laboratory sciences.

About LT Technologies

LT Technologies is an innovative and rapidly emerging technology company that provides water purification, filtration and treatment solutions to a diverse customer base. With cost-effective systems and a strong focus on meeting budgets and deadlines, LT Technologies is the water systems provider to dozens of commercial, industrial, non-profit organizations and government agencies. Its customer list includes Coca-Cola, Dow Chemical, General Electric, Kaman Aerospace, Siemens, Umicore and URS. More information on LT Technologies and the company’s products and services is available at: www.lttechnologies.com.

As PS Asia celebrates its 10th anniversary of staging Asia’s most established international exhibition on Process & Systems, it is getting all fully geared to provide an important and central industry platform with valuable opportunities for networking for all stakeholders involved in the process and systems industries.

PS Asia a biennial event to be held in Singapore from 1 -3 September 2010 at the Marina Bay Sands, Singapore is more than 70% booked up. This major event for the Process & Systems industry is a key industry event for fluid, air, gas handling systems. Among the exhibitors who have signed up for the event include companies such as Euroflo Pumps International, FloAsia, F. W. Oventrop GmbH, Pakkens Inc and Acme (Pump) Asia.

PS Asia 2010, a household name for the industry, established since 10 years ago, in particular has already gained increasing worldwide attention & recognition as an effective channel to deliver product information, promotional messaging, products distribution and business expansion. These are some of the main reasons that the show enjoys mounting interest from exhibitors. Among its wide scope of exhibitors is Hydro Australia, with a range of specialist services applicable to the pump industry. Among their services and products are pump repairs, upgrades & re-rates, right up to field service, turnkey & testing as well as supply of engineered parts and engineering support. Focused on solutions for customers, Hydro Australia partners clients to improve the reliability and efficiency of their pumping systems so as to improve their competitive edge.

Exhibiting its product range, comprising a total of 8 product groups with 39 safety valve types, Leser LLP is all geared to reach out to its target markets of Singapore, Indonesia and China through PS Asia 2010. A variety of Leser’s valve materials and sizes from DN 10 to DN 400 – ½” to 16″ provide safe solutions for almost every industrial application.

Flotronic Pumps, founded in 1981, is a British specialist manufacturer of air-operated diaphragm pumps, is famous for its development of a unique ‘One Nut’ pump design, which allows swift disassembly without disconnecting the pump from the process. Today, through Floasia Pte Ltd it is the leading distributor for fluid process handling systems and components in Asia Pacific. Taking a stand at PS Asia 2010, the company aims to expand its export of pumps through its network of strategically placed distributors.

Even premier supplier of fluid management products and engineering solutions that measure, analyze, control and automate process related operations, Accutech Fluid Products Pte Ltd, is making its stand at PS Asia to enhance its distribution of its range of instrument valves, fittings, tubings and accessories for a wide range of Industries including petrochemical, oil & gas, energy, pharmaceutical, defense, pulp & paper, mining, marine, offshore, biopharmaceutical, biotechnology and semiconductor.

PS Asia in tandem with the Green Movement across Asia: In its report of 19 May 2010, a Business Wire via Newedge Corporation advises that “Green building techniques are increasingly becoming the standard within the architecture and construction industries” according to research analyst Eric Bloom. He added that “There are three major drivers behind green building certifications: environmental responsibility, reducing operating expenses through energy efficiency, and regulatory requirements that mandate energy efficiency and certifications.”

PS Asia 2010 recognizes the green movement sweeping across industries and has aptly themed it’s PS Asia 2010 Industry Conference “Green Energy Systems for Tomorrow”. Industry experts will discuss a range of topics of current interest at this one-day event. Among the key areas to be discussed would be those covering Strategies, Innovation & Efficiency and Technology. Included are topics such as Strategies for tomorrow and the direction the industry is headed, Innovative business models through a CEO’s approach to growth, Policies and standards that lead to an economic impact, a Round Table discussion on Energy Efficiency, Funding energy efficiency, What ISO 50001 means to the industry, Role of technology in eco balance, Technological collaboration across industrial sectors and more.

It is important for exhibitors to choose the right show, that is which best targets your key buyers” said Ms Theresa Gan, Group Exhibitions Director, IIR Exhibitions Pte Ltd Asia. She added a wide range of dynamic, social and networking events that allow exhibitors and buyers good opportunities to meet have been programmed”.

Showcasing innovative & state-of-the-art technological developments, industry best practices and top insights from high level industrial leaders, this highly anticipated event will be dedicated to addressing the needs and requirements of the processing & system industries as a whole. Organized by IIR Exhibitions Singapore, the event has firmly established its reputation as the industries’ must attend trade show for the process and systems industries of Asia.

For more information, please visit http://www.psseries.com/asia

ABOUT IIR EXHIBITIONS:

IIR Exhibitions Pte Ltd, established since 1973, is part of Informa Plc, the world’s leading international provider of specialist information and services for the academic and scientific, professional and commercial business communities via publishing, events and performance improvement. Informa, a public listed company quoted on the London Stock Exchange and ranked amongst the FTSE-Group produces over 10,000 events and training courses, distributes 40,000 book titles, 2000 subscription-based information services and serving several industry sectors.

IIR Exhibitions Pte Ltd run a series of PS/HVAC exhibitions and conferences around the region including Singapore, Indonesia and Vietnam for 2010/2011. These exhibitions have been accorded the distinction of being UFI-awarded events.

For more information, please visit http://www.informa.com / http://www.iirx.com.sg

For Sales Enquiries, please contact:

Theresa Gan
Group Exhibitions Director
IIR Exhibitions Pte Ltd
Email: theresa.gan@iirx.com.sg
DID: +65 6319 2654

For Media Enquiries, please contact:

Theodora Prasetio
Marketing Manager
IIR Exhibitions Pte Ltd
Email: theodora.prasetio@iirx.com.sg
DID: +65 6319 2655

Stanford Who’s Who welcomes Murray Thomas to the ranks of leading professionals due to his phenomenal work in the Plumbing Industry. As CEO of the Master Plumbers & Gasfitters Association of Western Australia, as well as throughout his brilliant 35 year career, Murray has consistently displayed the dedication, diligence and professionalism necessary to be considered among the best.

The mission of the Master Plumbers & Gasfitters Association is to be the voice of the Plumbing Industry in Western Australia, protect the health and safety of the public as well as the environment by promoting professional and ethical business practice among its members and contractors. They are also concerned with ensuring the standards of the trade are maintained at an acceptable level through appropriate training and education.

Over the past 100 years, the Association has been able to provide dedicated representation of the Plumbing Industry in Western Australia. The Master Plumbers and Gasfitters Association of Western Australia remains the only dedicated organization concerned with the future viability of the Plumbing Industry. Their incredible commitment to training and continual improvement will keep it at the forefront of industry development for the next 100 years.

Mr. Thomas is responsible for overseeing the employees as well as managing the daily operations of the organization. During his educational career, Murray earned Certificate 4 in Training Assessment. He also holds a Contractors License as a Plumber and Gas Fitter. Murray is a member of Master Plumbers Australia Ltd.

To view more information on Murray Thomas click here

About Stanford Who’s Who
Stanford Who’s Who empowers executives, professionals and entrepreneurs around the world. Our mission is to recognize successful individuals in multiple industries by providing a forum for networking, consulting, exposure and credibility to broadening one’s future success. Realizing the power of forming business and professional relationships, we have created numerous resources that our members use for a multitude of reasons. With access to thousands of professional biographies of individuals in over 100 different industries, our members utilize our database to recruit others, to announce their career accomplishments, and for lasting, valuable relationships that extend beyond our membership program.